Thomson TG585 v7: DHCP aktivieren

Alle technisch orientierten Fragen und Diskussionen rund um Internet-Zugänge via ADSL und xDSL (alle DSL-basierenden Technologien).
Forumsregeln
Alle technisch orientierten Fragen und Diskussionen rund um Internet-Zugänge via ADSL und xDSL (alle DSL-basierenden Technologien).

Diskussionen ĂĽber Provider (deren Produkte und Dienstleistungen) werden im Bereich PROVIDER gefĂĽhrt.

Thomson TG585 v7: DHCP aktivieren

Beitragvon Tubos » Sa 27 Sep, 2008 11:22

Hallo,

ich habe nun mein Modem getauscht und verwende jetzt das Thomson TG585v7. Habe mir eine Multiuser-Konfiguration aus dem Internet geholt und angepasst. Internet funktioniert, aber meine Rechner bekommen mittels DHCP keine Adressen zugewiesen.

Die Konfiguration sieht so aus (Das TG585 hat die IP 192.168.0.200)
Code: Alles auswählen
[ dhcspool.ini ]
pool add name=LAN_private
[ dhcs.ini ]
debug traceconfig state=disabled
policy verifyfirst=enabled trustclient=enabled rtbehaviour=traditional
pool config name=LAN_private state=enabled intf=LocalNetwork poolstart=192.168.0.10 poolend=192.168.0.20 netmask=24 gateway=192.168.0.200 primdns=195.58.161.122 secdns=192.168.0.200 server=192.168.0.200 leasetime=7200


Stimmt was mit der Konfig nicht?
Tubos
Neu im Board
Neu im Board
 
Beiträge: 23
Registriert: Sa 26 Nov, 2005 21:22

Beitragvon Stefan Hedenig » Sa 27 Sep, 2008 14:20

hmm ich sehe zwar dass der pool enabled ist, nicht aber dass der server an sich enabled ist...
geh mal ĂĽber telnet aufs modem und schreib dort

dhcp server config state=enabled

vielleicht gehts dann :)
Stefan Hedenig
Advanced Profi-User
Advanced Profi-User
 
Beiträge: 2246
Registriert: Fr 18 Jul, 2003 05:50
Wohnort: Klagenfurt

Beitragvon Tubos » So 28 Sep, 2008 07:51

Hallo,

der DHCP-Server ist jetzt auf enabled, trotzdem bekommt kein Rechner IP-Adressen. "dhcp server debug stats" zeigt an:
Code: Alles auswählen
DHCP server state: Running
DHCP server statistics:
Corrupted packet recv       : 0
DISCOVER                    : 0
REQUEST                     : 0
DECLINE                     : 0
RELEASE                     : 0
INFORM                      : 0
Pure BOOTP REQUESTS         : 0
Other message types         : 0
OFFERs sent                 : 0
ACKs sent                   : 0
NAKs sent                   : 0
Packet sent failures        : 0
Relay agent options dropped : 0

Lease table got full        : no
Ping table got full         : no
Second DHCP server seen     : no
Total size of lease table   : 256, in use: 0 free: 100 %


Wo könnte denn noch der Fehler sitzen? Im Webinterface steht, dass die Bridge deaktiviert ist, kann das der Grund sein?
Tubos
Neu im Board
Neu im Board
 
Beiträge: 23
Registriert: Sa 26 Nov, 2005 21:22

Beitragvon Stefan Hedenig » So 28 Sep, 2008 08:15

das interface bridge sollte auf jeden fall up sein.

Geh ins Telnet interface und mach einmal ein
interface list

das sollte ungefähr so aussehen:

Code: Alles auswählen
Name          Type                 State            Use  UL Interfaces
loop          ip                   connected        0
ethif1        physical             connected        1    ethport1
ethif2        physical             connected        1    ethport2
ethif3        physical             connected        1    ethport3
ethif4        physical             connected        1    ethport4
wlif1         physical             not-connected    0
ceoc          dsl                  connected        0
bridge        eth                  connected        1    LocalNetwork
OBC           bridge               connected        1    bridge
ethport1      bridge               connected        1    bridge
ethport2      bridge               connected        1    bridge
ethport3      bridge               connected        1    bridge
ethport4      bridge               connected        1    bridge
...
Stefan Hedenig
Advanced Profi-User
Advanced Profi-User
 
Beiträge: 2246
Registriert: Fr 18 Jul, 2003 05:50
Wohnort: Klagenfurt

Beitragvon bully » So 28 Sep, 2008 08:42

Hmmm, ich würde einmal alles außer poolstart, poolend, netmask, gateway und leasetime rauslöschen. Wenn man dhcp verwendet schickt das Thomson dann sowieso die eigene ip als 1. Dns-Server und der Dns-server am Modem kriegt die Dns-server des Providers beim Starten des ppp-links.

Außerdem scheint die "Anpassung" der Multiuser-ini nicht nur in dem Bereich schiefgegangen zu sein. Häng einmal die ganze ini an, dein Ausschnitt alleine ist nicht wirklich aussagekräftig genug.

lg
bully
bully
Senior Board-Mitglied
Senior Board-Mitglied
 
Beiträge: 477
Registriert: So 04 Jun, 2006 10:38

Beitragvon Tubos » So 28 Sep, 2008 14:12

Code: Alles auswählen
\=>interface list
Name                     Type                 State            Use  UL Interfaces
loop                     ip                   connected        0
ethif1                   physical             connected        1    ethport1
ethif2                   physical             connected        1    ethport2
ethif3                   physical             connected        1    ethport3
ethif4                   physical             connected        1    ethport4
wlif1                    physical             connected        1    WLAN
ceoc                     dsl                  connected        0
bridge                   eth                  connected        2    RELAY, LocalNetwork
OBC                      bridge               connected        1    bridge
ethport1                 bridge               connected        1    bridge
RELAY                    eth                  connected        0
atm_8_35                 atm                  connected        1    Bridge
atm_8_48                 atm                  connected        1    Shared_Internet_ppp
Bridge                   bridge               not-connected    0
ethport2                 bridge               connected        1    bridge
ethport3                 bridge               connected        1    bridge
ethport4                 bridge               connected        1    bridge
WLAN                     bridge               connected        1    bridge
Shared_Internet_ppp      ppp                  connected        1    Shared_Internet
Shared_Internet         *ip                   connected        0
Shared_Internet_trigger  ip                   connected        0
LocalNetwork             ip                   connected        0


Hier ist meine gesamte Konfiguration, frisch vom Gerät heruntergeladen:
Code: Alles auswählen
[ sntpc.ini ]
config poll=60 pollpresync=60
config state=disabled

[ xdsl.ini ]
debug traceconfig level=0
config adslmultimode=adsl2plus detect-lop=enabled syslog=disabled
debug multimode config=default+t1.413issue2+g992.1_annex_a+g992.2+g992.3_annex_a+g992.3_annex_l+g992.3_annex_m+g992.5_annex_a+g992.5_annex_m

[ adslpots.ini ]

[ cac.ini ]
config port=dsl0 state=enabled
config port=dsl1 state=enabled
config port=atm2 state=enabled
config port=aal5 state=disabled
config port=atm5 state=disabled
overbooking rt=0 nrt=0

[ language.ini ]
config language=de complete=no

[ script.ini ]

[ env.ini ]
set var=CONF_COND_ENCRYPT value=enabled
set var=CONF_REGION value=Austria
set var=CONF_PROVIDER value=Internetdienstanbieter
set var=CONF_DESCRIPTION value="Multi User Austria"
set var=CONF_SERVICE value="Breitbandzugang Dial On Demand"
set var=CONF_VERSION value=5.3.1.8
set var=UPGRADE_URL value=http://www.speedtouch.com/upgrade500.htm
set var=HOST_SETUP value=none
set var=COLUMNS value=80
set var=ROWS value=24
set var=SESSIONTIMEOUT value=180
set var=CONF_DATE value="An der Konfiguration wurden manuell Ă„nderungen vorgenommen."
set var=CONF_TPVERSION value=2.0.0

[ wizard.ini ]
config allow_factory_tpl=no trace=no autopopup=no configtime=30

[ phone.ini ]
add name=Bridge addr=8*35
add name=Internet addr=8*48

[ ipqos.ini ]
config dest=Bridge
config dest=Internet

[ qos.ini ]
config format=bytes
ctdadd name=ubr_0_0 conformance=UBR
add name=default txctd=ubr_0_0 rxctd=ubr_0_0

[ atm.ini ]
ifadd intf=atm_8_35
ifconfig intf=atm_8_35 dest=Bridge ulp=mac
ifattach intf=atm_8_35
ifadd intf=atm_8_48
ifconfig intf=atm_8_48 dest=Internet encaps=vcmux ulp=ppp
ifattach intf=atm_8_48

[ oam.ini ]
config clp=1 loopbackid=6a6a6a6a6a6a6a6a6a6a6a6a6a6a6a6a
modify port=dsl0 blocking=enabled
modify port=dsl1 blocking=enabled
modify port=atm2 blocking=enabled
modify port=atm3 blocking=enabled
modify port=aal5 blocking=enabled
modify port=atm5 blocking=enabled

[ snmp.ini ]
config sysContact="Service provider" sysName=ST5xx sysLocation=Austria

[ vlan_res.ini ]
add name=wan vid=3 addrule=disabled
add name=dmz vid=4 addrule=disabled
add name=guest vid=5 addrule=disabled
add name=MGMT_vlan vid=6 addrule=disabled
add name=HSI_vlan vid=7 addrule=disabled
add name=VoIP_vlan vid=8 addrule=disabled
add name=IPTV_vlan vid=9 addrule=disabled

[ bridge.ini ]
ifadd brname=bridge intf=Bridge
ifadd brname=bridge intf=ethport2 dest=ethif2 logging=disabled
ifadd brname=bridge intf=ethport3 dest=ethif3 logging=disabled
ifadd brname=bridge intf=ethport4 dest=ethif4 logging=disabled
ifadd brname=bridge intf=WLAN dest=wlif1 logging=disabled
ifconfig brname=bridge intf=ethport1 wan=disabled logging=disabled
ifconfig brname=bridge intf=Bridge dest=atm_8_35 wan=enabled
ifconfig brname=bridge intf=ethport2 wan=disabled logging=disabled
ifconfig brname=bridge intf=ethport3 wan=disabled logging=disabled
ifconfig brname=bridge intf=ethport4 wan=disabled logging=disabled
ifconfig brname=bridge intf=WLAN wan=disabled logging=disabled
ifattach brname=bridge intf=ethport2 logging=disabled
ifattach brname=bridge intf=ethport3 logging=disabled
ifattach brname=bridge intf=ethport4 logging=disabled
ifattach brname=bridge intf=WLAN logging=disabled
config brname=bridge age=300 filter=no_WAN_broadcast vlan=disabled precedencemap=4,7,9,11,13,14,15,15

[ vlanbridge.ini ]
ifadd name=MGMT_vlan intf=OBC untagged=disabled
ifadd name=MGMT_vlan intf=Bridge untagged=disabled
ifadd name=HSI_vlan intf=OBC untagged=disabled
ifadd name=HSI_vlan intf=Bridge untagged=disabled

[ bridgevlan.ini ]

[ vlanbridgerule.ini ]

[ bridgeintfxtratag.ini ]

[ bridgeunknownvlan.ini ]

[ dvm_res.ini ]
config timeout=90

[ igmpsnooping.ini ]
ifconfig brname=bridge intf=OBC portmode=Auto fastleave=disabled exptrack=disabled mrdp=disabled rgmp=disabled
ifconfig brname=bridge intf=ethport1 portmode=Auto fastleave=disabled exptrack=disabled mrdp=disabled rgmp=disabled
ifconfig brname=bridge intf=Bridge portmode=Auto fastleave=disabled exptrack=disabled mrdp=disabled rgmp=disabled
ifconfig brname=bridge intf=ethport2 portmode=Auto fastleave=disabled exptrack=disabled mrdp=disabled rgmp=disabled
ifconfig brname=bridge intf=ethport3 portmode=Auto fastleave=disabled exptrack=disabled mrdp=disabled rgmp=disabled
ifconfig brname=bridge intf=ethport4 portmode=Auto fastleave=disabled exptrack=disabled mrdp=disabled rgmp=disabled
ifconfig brname=bridge intf=WLAN portmode=Auto fastleave=disabled exptrack=disabled mrdp=disabled rgmp=disabled
config brname=bridge state=disabled floodrp=disabled floodmcast=disabled

[ eth.ini ]

[ pptp.ini ]
profadd name=pptp

[ ppprelay.ini ]
ifadd intf=bridge

[ dhcspool.ini ]
pool add name=LAN_private

[ label.ini ]
add name=DSCP
add name=Interactive
add name=Management
add name=Video
add name=VoIP
add name=default
modify name=DSCP classification=overwrite defclass=dscp ackclass=defclass
modify name=Interactive classification=increase defclass=8 ackclass=8
modify name=Management classification=increase defclass=12 ackclass=12
modify name=Video classification=increase defclass=10 ackclass=10
modify name=VoIP classification=overwrite defclass=14 ackclass=14 bidirectional=enabled inheritance=enabled
modify name=default classification=increase defclass=default ackclass=prioritize

[ ppp.ini ]
ifadd intf=Shared_Internet
rtadd intf=Shared_Internet dst=0.0.0.0/0 src=0.0.0.0/0 metric=1
ifconfig intf=Shared_Internet dest=atm_8_48 pcomp=enabled accomp=enabled trace=enabled mru=1500 demanddial=enabled doddelay=10 dnsmetric=0 idletime=900 idletrigger=Tx
ifconfig intf=Shared_Internet user=mein_benutzername password=mein_passwort status=enabled

[ ip.ini ]
ifadd intf=LocalNetwork dest=bridge
ifconfig intf=loop mtu=65535 group=local
ifconfig intf=LocalNetwork mtu=1500 group=lan linksensing=enabled primary=enabled
ifattach intf=LocalNetwork
config forwarding=enabled redirects=enabled netbroadcasts=disabled ttl=64 fraglimit=64 defragmode=enabled addrcheck=dynamic mssclamping=enabled
config checkoptions=transparent
config natloopback=disabled
debug traceconfig mode=dump
ipadd intf=LocalNetwork addr=192.168.0.200/24 addroute=enabled
rtadd dst=255.255.255.255/32 gateway=127.0.0.1
rtadd dst=224.0.0.0/4 intf=LocalNetwork

[ autoip.ini ]

[ ipqosmeter.ini ]

[ igmh.ini ]
config requirera=disabled

[ autopvc.ini ]
config mode=pseudo type=bridge overwrite=disabled peakrate=0

[ mcast.ini ]

[ diagnostics.ini ]
config pingtimeout=1000 pingpacketsize=32

[ dnsc.ini ]
config timeout=5 retry=4 search=enabled trace=disabled
dnsadd addr=127.0.0.1 port=53

[ dnss.ini ]
config domain=lan timeout=15 suppress=0 state=enabled trace=enabled syslog=disabled WANDownSpoofing=disabled WDSpoofedIP=195.3.96.0
host add name=speedtouch addr=0.0.0.0 ttl=1200
host add name=dsldevice addr=0.0.0.0 ttl=1200

[ dhcrule.ini ]
debug traceconfig state=disabled

[ dhcs.ini ]
debug traceconfig state=disabled
policy verifyfirst=enabled trustclient=enabled rtbehaviour=traditional
pool config name=LAN_private state=enabled intf=LocalNetwork poolstart=192.168.0.10 poolend=192.168.0.20 netmask=24 gateway=192.168.0.200 server=192.168.0.200 leasetime=7200

[ dhcr.ini ]
ifconfig intf=LocalNetwork relay=enabled

[ dhcc.ini ]
debug traceconfig state=disabled

[ dhcsp.ini ]
debug traceconfig state=disabled
config state=disabled

[ upgrade.ini ]
config state=enabled protocol=tftp
debug traceconfig state=enabled
profile add extension=sts destdir=dl maxsize(KBytes)=100 action=script_load
profile add extension=ini destdir=dl maxsize(KBytes)=100 action=config_load
profile add extension=bin destdir=dl maxsize(KBytes)=8000 action=upgrade

[ dyndns.ini ]
service modify name=dyndns server=members.dyndns.org port=www-http request=/nic/update updateinterval=2097120 retryinterval=30 max_retry=3
service modify name=statdns server=members.dyndns.org port=www-http request=/nic/update retryinterval=30 max_retry=3
service modify name=custom server=members.dyndns.org port=www-http request=/nic/update retryinterval=30 max_retry=3
service modify name=No-IP server=dynupdate.no-ip.com port=www-http request=/ducupdate.php updateinterval=86400 retryinterval=30 max_retry=3
service modify name=DtDNS server=dtdns.com port=www-http request=/api/autodns.cfm updateinterval=86400 retryinterval=30 max_retry=3
service modify name=gnudip port=www-http
add name=dyndns_0
modify name=dyndns_0 service=

[ expr.ini ]
add name=wan type=intf intfgroup=wan
add name=lan type=intf intfgroup=lan
add name=local type=intf intfgroup=local
add name=private type=ip addr=192.0.0.0/8 mask=0
add name=private type=ip addr=172.[16-31].*.* mask=0
add name=private type=ip addr=192.168.1.0/24 mask=0
add name=ssdp_ip type=ip addr=239.255.255.250 mask=0
add name=mdap_ip type=ip addr=224.0.0.103 mask=0
add name=icmp type=serv proto=icmp
add name=igmp type=serv proto=igmp
add name=ftp type=serv proto=tcp dstport=ftp
add name=telnet type=serv proto=tcp dstport=telnet
add name=http type=serv proto=tcp dstport=www-http
add name=httpproxy type=serv proto=tcp dstport=httpproxy
add name=https type=serv proto=tcp dstport=443
add name=RPC type=serv proto=tcp dstport=135
add name=NBT type=serv proto=udp dstport=netbios-ns
add name=NBT type=serv proto=udp dstport=netbios-dgm
add name=NBT type=serv proto=tcp dstport=netbios-ssn
add name=SMB type=serv proto=tcp dstport=445
add name=imap type=serv proto=tcp dstport=imap2
add name=imap3 type=serv proto=tcp dstport=imap3
add name=imap4-ssl type=serv proto=tcp dstport=585
add name=imaps type=serv proto=tcp dstport=993
add name=pop2 type=serv proto=tcp dstport=pop2
add name=pop3 type=serv proto=tcp dstport=pop3
add name=pop3s type=serv proto=tcp dstport=995
add name=smtp type=serv proto=tcp dstport=smtp
add name=ssh type=serv proto=tcp dstport=22
add name=dns type=serv proto=tcp dstport=dns
add name=dns type=serv proto=udp dstport=dns
add name=nntp type=serv proto=tcp dstport=nntp
add name=ipsec type=serv proto=ah
add name=ipsec type=serv proto=esp
add name=ipsec type=serv proto=udp srcport=ike dstport=ike
add name=esp type=serv proto=esp
add name=ah type=serv proto=ah
add name=ike type=serv proto=udp dstport=ike
add name=DiffServ type=serv dscp=!cs0
add name=sip type=serv proto=udp dstport=sip
add name=sip type=serv proto=tcp dstport=sip
add name=h323 type=serv proto=tcp dstport=h323
add name=h323 type=serv proto=udp dstport=h323
add name=h323 type=serv proto=tcp dstport=1718
add name=h323 type=serv proto=udp dstport=1718
add name=h323 type=serv proto=tcp dstport=1719
add name=h323 type=serv proto=udp dstport=1719
add name=dhcp type=serv proto=udp dstport=bootpc
add name=dhcp type=serv proto=udp dstport=bootps
add name=rtsp type=serv proto=udp dstport=rtsp
add name=rtsp type=serv proto=tcp dstport=rtsp
add name=ssdp_serv type=serv proto=udp dstport=1900
add name=mdap_serv type=serv proto=udp dstport=3235
add name=syslog type=serv proto=udp dstport=syslog

[ labelrule.ini ]
chain add chain=rt_user_labels
chain add chain=rt_default_labels
chain add chain=qos_user_labels
chain add chain=qos_default_labels
rule add chain=qos_default_labels index=1 serv=sip log=disabled state=enabled label=VoIP
rule add chain=qos_default_labels index=2 serv=h323 log=disabled state=enabled label=VoIP
rule add chain=qos_default_labels index=3 serv=telnet log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=4 serv=smtp log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=5 serv=imap4-ssl log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=6 serv=imap3 log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=7 serv=imap log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=8 serv=imaps log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=9 serv=pop3s log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=10 serv=pop3 log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=11 serv=pop2 log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=12 serv=httpproxy log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=13 serv=http log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=14 serv=https log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=15 serv=esp log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=16 serv=ah log=disabled state=enabled label=Interactive
rule add chain=qos_default_labels index=17 serv=dns log=disabled state=enabled label=Management
rule add chain=qos_default_labels index=18 serv=ike log=disabled state=enabled label=Management
rule add chain=qos_default_labels index=19 serv=icmp log=disabled state=enabled label=Management
rule add chain=qos_default_labels index=20 serv=rtsp log=disabled state=enabled label=Video
rule add chain=qos_default_labels index=21 serv=igmp log=disabled state=enabled label=Video
rule add chain=qos_default_labels index=22 name=default srcintf=!wan log=disabled state=enabled label=default

[ ids.ini ]
config state=enabled trace=disabled
signature modify signature=spoofed_packet state=disabled

[ ids_threshold.ini ]
modify index=1 window=20 limit=20 scaling=enabled
modify index=2 window=2 limit=100 scaling=disabled
modify index=3 window=1 limit=200 scaling=disabled
modify index=4 window=1 limit=200 scaling=disabled
modify index=5 window=1 limit=200 scaling=disabled
modify index=6 window=1 limit=200 scaling=disabled
modify index=7 window=1 limit=200 scaling=disabled

[ cwmp.ini ]
config state=disabled mode=full periodicInform=enabled periodicInfInt=3600 sessionTimeout=60 noIpTimeout=300 maxEnvelopes=2 connectionRequest=disabled connectionReqPath=H2EvrLjAeCfKeWvc connectionReqUserName="" connectionReqPsswd=\"\" connectionReqAuth=none qos-class=12 bootdelayrange=120 upgradedelay=disabled persistentSubscription=disabled
config am1Termination=disabled
server config url=\"\" username=\"\" password=\"\"
debug traceconfig level=2
runtimevar softwareVersion=7.4.3.2 bootstrap=disabled parameterkey=""

[ grp.ini ]

[ rip.ini ]
config state=disabled

[ nat.ini ]
ifconfig intf=Shared_Internet translation=enabled
config trace=enabled

[ igmp.ini ]
config state=disabled qi=125 qri=10 lmqi=1 rv=2 advinter=20 initadvinter=2 initadvcount=3 requirera=disabled localgroup=disabled
ifconfig intf=LocalNetwork state=inactive
ifconfig intf=Shared_Internet_trigger state=inactive
ifconfig intf=Shared_Internet state=inactive

[ ipqosef.ini ]
ef config intf=LocalNetwork state=enabled

[ connection.ini ]
appconfig application=IP6TO4 trace=disabled
appconfig application=PPTP trace=enabled timeout=300
appconfig application=ESP timeout=900
appconfig application=IKE trace=disabled timeout=900 floating=enabled
appconfig application=SIP trace=enabled timeout=21600 floating=enabled tracelevel=4
appconfig application=SIP SIP_ALG=enabled RTP_predict_for_term_SIP_ALG=enabled
appconfig application=JABBER trace=disabled timeout=120
appconfig application=CU/SeeMe trace=disabled
appconfig application=RAUDIO(PNA) trace=disabled
appconfig application=RTSP trace=disabled timeout=0
appconfig application=ILS timeout=300
appconfig application=H245 timeout=300
appconfig application=H323 trace=disabled
appconfig application=IRC trace=disabled timeout=300
appconfig application=GAME(UDP) trace=disabled timeout=60
appconfig application=CONE(UDP) trace=disabled timeout=300
appconfig application=LOOSE(UDP) trace=disabled timeout=300
appconfig application=FTP trace=disabled
bind application=IP6TO4 port=0
bind application=PPTP port=1723-1723
bind application=ESP port=0
bind application=IKE port=500-500
bind application=SIP port=5060-5060
bind application=CU/SeeMe port=7648-7648
bind application=RAUDIO(PNA) port=7070-7070
bind application=RTSP port=554-554
bind application=ILS port=389-389
bind application=ILS port=1002-1002
bind application=H323 port=1720-1720
bind application=IRC port=6660-6669
bind application=FTP port=21-21
bind application=JABBER port=5222-5222
bind application=JABBER port=15222-15222
bind application=LOOSE(UDP) port=67-67
config configchangemode=immediate probes=disabled
debug trace=disabled
timerconfig timer=tcpidle value=900
timerconfig timer=tcpneg value=120
timerconfig timer=tcpkill value=3600
timerconfig timer=udpidle value=60
timerconfig timer=udpkill value=60
timerconfig timer=icmpkill value=60
timerconfig timer=ipidle value=60
timerconfig timer=ipkill value=60
timerconfig timer=aiprefresh value=60

[ switch.ini ]
mirror capture port=1
qos config state=disabled nbrOfQueues=0 realtime=disabled
storm ifconfig port=1 state=disabled rate=100 burstsize=2 broadcast=disabled multicast=disabled unknown=disabled
storm ifconfig port=2 state=disabled rate=100 burstsize=2 broadcast=disabled multicast=disabled unknown=disabled
storm ifconfig port=3 state=disabled rate=100 burstsize=2 broadcast=disabled multicast=disabled unknown=disabled
storm ifconfig port=4 state=disabled rate=100 burstsize=2 broadcast=disabled multicast=disabled unknown=disabled

[ upnp.ini ]
config maxage=1800 writemode=full safenat=disabled

[ system.ini ]
settime timezone=+00:00 daylightsaving=disabled
dst status=Disable mode=Absolute startdate=24/01/2000 starttime=00:00:00 enddate=24/01/2000 endtime=00:16:40 startweekday=Sunday starthour=0 startweek=5 startmonth=3 endweekday=Sunday endhour=0 endweek=5 endmonth=10
config upnp=enabled tr64=disabled mdap=enabled resetbutton=enabled
config digestauth=enabled defaultconnection=Shared_Internet
config autosave=enabled autosavedelay=10
locale dec_symbol=, group_symbol=. date_separator=- date_format=ddmmyyyy time_format=hmmss datetime_format=date+time duration_format=dhmmss

[ system_debug.ini ]
autosave trace=disabled

[ system_raccess.ini ]
config secure=disabled port=51003 timeout=20

[ dsd.ini ]
intercept config WDSpoofedIP=0.0.0.0 servertimeout=0 connecterrorurl="" categoryerrorurl="" monitorintercepturl="" unauthorizedrequrl="" imageredirect=disabled imageredirecturl="" alwaysuseip=disabled
urlfilter config state=disabled blockproxy=disabled blockipaddress=disabled blockobscuredip=disabled defaultaction=block
syslog config syslog=none
debug config turbomode=disabled
debug proxy state=disabled dest=0.0.0.0 port=0
debug recycling state=enabled interval=5 httpidle=1 otheridle=12
config state=disabled

[ hostmgr.ini ]
config state=enabled scantime=30 autosave=disabled trace=disabled
add mac_addr=00:11:11:1c:a0:e5 ip_addr=192.168.0.5 name=Unknown-00-11-11-1c-a0-e5 type=generic_device ipintf=LocalNetwork physintf=ethif2
add mac_addr=00:18:f3:75:f5:24 ip_addr=192.168.0.10 name=Unknown-00-18-f3-75-f5-24 type=generic_device ipintf=LocalNetwork physintf=ethif3
add mac_addr=00:21:70:7d:74:18 ip_addr=192.168.0.1 name=Unknown-00-21-70-7d-74-18 type=generic_device ipintf=LocalNetwork physintf=ethif1

[ mlp.ini ]

[ mlpuser.ini ]

[ argroupmember.ini ]

[ tls.ini ]
acs-client config state=enabled auth-serv=disabled valid-date=disabled valid-domain=disabled
https-server config state=enabled auth-client=disabled valid-date=disabled valid-domain=disabled

[ wireless.ini ]
ifconfig interop=802.11b/g locale=Europe
ifconfig channel=auto ssid=Rauta any=enabled rts=2347 protection=auto protmode=rtscts prottrigger=local&overlap shortslot=auto frameburst=disabled dtim=3
macacl config control=register
macacl add hwaddr=00:22:69:b5:d3:5e permission=allow name=registered
secmode wep encryptionkey=7642201A98
secmode wpa-psk presharedkey=mein_wpa_key rekeysec=0 version=WPA2
secmode config mode=wpa-psk
wds config state=enabled

[ ra.ini ]
config state=disabled secure=enabled port=51003 timeout=20 mode=Temporary ipintf="" randompassword=enabled randomport=disabled group="" user=""

[ service.ini ]
...diverse Programme und deren Ports...

[ fwlevel.ini ]
add name=BlockAll index=1 readonly=enabled udptrackmode=strict service=disabled proxy=disabled text="Use this Security Level to block all traffic from and to the Internet."
add name=Standard index=2 readonly=enabled udptrackmode=loose service=enabled proxy=disabled text="Use this Security Level to allow all outgoing connections and block all incoming traffic.  Services and Application Sharing are allowed to open pinholes in the firewall."
add name=Disabled index=3 readonly=enabled udptrackmode=loose service=enabled proxy=disabled text="Disable the firewall. All traffic is allowed to pass through your SpeedTouch."
set name=Standard

[ firewall.ini ]
config state=enabled keep=disabled tcpchecks=exact udpchecks=enabled icmpchecks=enabled logdefault=disabled logthreshold=enabled tcpwindow=65536
debug traceconfig tcpchecks=disabled udpchecks=disabled icmpchecks=disabled sink=none forward=none source=none
rule add chain=source_fire index=1 name=AnyTraffic log=disabled state=enabled action=accept
rule add chain=forward_level_BlockAll index=1 name=AnyTraffic log=disabled state=enabled action=drop
rule add chain=forward_level_Standard index=1 name=FromLAN srcintf=lan log=disabled state=enabled action=accept
rule add chain=forward_level_Disabled index=1 name=AnyTraffic log=disabled state=enabled action=accept

[ servmgr.ini ]
ifadd name=HTTP group=lan
ifadd name=HTTPs group=lan
ifadd name=FTP group=lan
ifadd name=TELNET group=lan
ifadd name=DNS-S group=lan
ifadd name=SNMP_AGENT group=lan
ifadd name=PING_RESPONDER group=lan
modify name=PPTP state=enabled
modify name=SNTP state=disabled
modify name=SLA_ICMP_PING state=disabled
modify name=SLA_UDP_PING state=disabled
modify name=HTTP state=enabled
modify name=HTTPs state=enabled
modify name=TFTP-C state=disabled
modify name=FTP state=enabled
modify name=TELNET state=enabled
modify name=RIP state=disabled
modify name=IGMP-Proxy state=disabled
modify name=DNS-S state=enabled
modify name=DNS-C state=enabled
modify name=DHCP-S state=enabled
modify name=SNMP_AGENT state=enabled
modify name=SSDP state=enabled
modify name=MDAP state=enabled
modify name=CWMP-C state=disabled
modify name=CWMP-S state=disabled
modify name=IP_COMMANDS state=disabled
modify name=PING_RESPONDER state=enabled
mapadd name=HTTP port=www-http
mapadd name=HTTPs port=443
mapadd name=HTTPI intf=LocalNetwork port=www-http
mapadd name=HTTPI intf=LocalNetwork port=1080
mapadd name=HTTPI intf=LocalNetwork port=httpproxy
mapadd name=FTP port=ftp
mapadd name=TELNET port=telnet
mapadd name=DNS-S port=dns
mapadd name=SNMP_AGENT port=snmp
mapadd name=SSDP port=1900
mapadd name=MDAP port=3235

[ kta.ini ]

[ kti.ini ]

[ koa.ini ]
a d="" l=yes

[ koi.ini ]
a d="" l=yes

[ endofarch ]


Wenn in dieser Konfiguration mehr Sachen kaputt sind, dann konfigurier' ich das gerne von vorne, wenn ihr mir eine Basis-Konfig (Multiuser) empfehlen könnt...

Hmmm, ich würde einmal alles außer poolstart, poolend, netmask, gateway und leasetime rauslöschen.
Okay, hab' ich gemacht, hat nichts geändert.
Tubos
Neu im Board
Neu im Board
 
Beiträge: 23
Registriert: Sa 26 Nov, 2005 21:22

Beitragvon bully » So 28 Sep, 2008 14:36

Ok, nahdem ich nur einen schnellen Blick auf deine ini geworfen habe, hab ich festgestellt, dass die Basis dieser Datei ein Speedtouch 546v5 mit Firmware 5.3.1.8 ist. Vergiss das. Lade dir von meiner HP eine Multiuser-Datei fĂĽr das TG 585v7. Wenn du die mit den 192er Adressen nimmst, beachte die Hinweise, es gibt Situationen, wo das Einspielen beim erstenmal nicht funktioniert hat, dann musst resetten und nochmals einspielen. Und dann sehen wir weiter. Findest auf meiner HP unter Downloads.

lg
bully
bully
Senior Board-Mitglied
Senior Board-Mitglied
 
Beiträge: 477
Registriert: So 04 Jun, 2006 10:38

Beitragvon Tubos » So 28 Sep, 2008 16:37

Danke an alle, jetzt funktioniert alles - Internet, WLAN, DHCP, ...

Super Webseite ĂĽbrigens!
Tubos
Neu im Board
Neu im Board
 
Beiträge: 23
Registriert: Sa 26 Nov, 2005 21:22

Beitragvon bully » So 28 Sep, 2008 17:16

Danke. Es freut mich, das alles geklappt hat. :ok:

lg
bully
bully
Senior Board-Mitglied
Senior Board-Mitglied
 
Beiträge: 477
Registriert: So 04 Jun, 2006 10:38


ZurĂĽck zu ADSL & xDSL

Wer ist online?

Mitglieder in diesem Forum: Google [Bot], Yandex [Crawler] und 111 Gäste