Linksys wag54g - teacherADSL

[vitocorleone]

Hallo zusammen!

Ich habe als ISP teacherADSL von eduhi und würde gerne den Linksys wag54g verwenden. Ich habe schon einiges herumprobiert, allerdings bekomme ich die Verbindung nicht hin...
Ich habe mir vom ISP die nötigen Einstellungen (VCI, VPI, Host, Domain,....) schicken lassen, es funktioniert aber trotzdem nicht.

Nur mit dem speedtouch-Modem und Netzwerkkabel funktioniert aber alles tadellos - d.h. an der Leitung liegt's nicht...

Bitte um eure Hilfe!!!

LG,
Vito

[jutta]

was genau funktioniert nicht? wird der wag54g synchron? (welche leds leuchten?)

[vitocorleone]

Ja, die nötigen LEDs leuchten alle. (Power, Ethernet, WLAN, DSL)

Bei Status-DSL-Connection, sehe ich schön alle Daten der DSL-Verbindung: Modulation Mode, Path Mode, Downstream Rate, Upstream Rate,....

Wenn ich aber auf Status-Gateway gehe, sehe ich, dass er keine Adresse hat. Alles 0.0.0.0

[jutta]

und was hast du eingestellt? teacher-adsl funktioniert ja wie jedes andere adsl:
pppoa, vc-mux, vpi 8, vci 48, username, passwort. fertig.

[vitocorleone]

Ja genau! Das sind meine Einstellungen - geht aber trotzdem nicht...

[vitocorleone]

Hab eine fixe IP-Adresse. Hat's vielleicht damit was zu tun?

[jutta]

sollte nicht - die ip kriegst du trotzdem vom server zugewiesen.

//ps: ausserdem kannst du ja alle einstellungen im speedtouch nachschauen.

[vitocorleone]

Naja, dachte ich mir.

Welche Einstellungen soll ich beim speedtouch nachschauen?

[vitocorleone]

Ok - beim speedtouch steht folgendes:

Verbindungseinstellungen
PVC-Info (VPI.VCI): 8.35

Hab als VCI jetzt 35 eingegeben, funktioniert aber trotzdem nicht...

[jutta]

hmm - das sieht dann aber aus, als wuerde sich teacher-adsl (oder die variante von teacher adsl die du hast) doch gravierender von "normalem" adsl unterscheiden. poste bitte einmal die aktuelle user.ini des speedtouch modems.

[vitocorleone]

Tja, ich weiß auch nicht...

Hier auf alle Fälle die Datei:

Code: Alles auswählen

[ cac.ini ]
config port=dsl0 state=enabled
config port=dsl1 state=enabled
config port=atm2 state=enabled
config port=aal5 state=disabled
config port=atm5 state=disabled
overbooking rt=0 nrt=0

[ language.ini ]
config language=de complete=no

[ script.ini ]

[ env.ini ]
set var=CONF_REGION value=Austria
set var=CONF_PROVIDER value=Internetdienstanbieter
set var=CONF_DESCRIPTION value=Einzelplatzanbindung
set var=CONF_SERVICE value="Breitbandzugang SU"
set var=CONF_DATE value=18.10.2006
set var=CONF_VERSION value=5.3.x
set var=UPGRADE_URL value=http://www.speedtouch.com/upgrade/upgrade.htm
set var=HOST_SETUP value=none
set var=COLUMNS value=80
set var=ROWS value=24
set var=SESSIONTIMEOUT value=180
set var=DISP_SERVICE value="Breitbandzugang SU"
set var=HOST_LANG_ID value=de
set var=HOST_MAC_ADDR value=00-30-4F-2F-12-A1
set var=HOST_IP_ADDR value=192.168.0.3
set var=HOST_NET_MASK value=255.255.255.0
set var=HOST_GATEWAY value=\"\"
set var=HOST_DNS value=\"\"
set var=HOST_NAME value=vito
set var=CONF_TPVERSION value=2.0.0

[ wizard.ini ]
config allow_factory_tpl=no trace=no autopopup=no configtime=30

[ phone.ini ]
add name=Bridge addr=8*35
add name=Internet addr=8*48

[ ipqos.ini ]
config dest=Bridge
config dest=Internet

[ qos.ini ]
config format=bytes
ctdadd name=default conformance=UBR
add name=default txctd=default rxctd=default

[ atm.ini ]
ifadd intf=atm_8_35
ifconfig intf=atm_8_35 dest=Bridge ulp=mac
ifattach intf=atm_8_35

[ oam.ini ]
config clp=1 loopbackid=6a6a6a6a6a6a6a6a6a6a6a6a6a6a6a6a
modify port=dsl0 blocking=enabled
modify port=dsl1 blocking=enabled
modify port=atm2 blocking=enabled
modify port=atm3 blocking=enabled
modify port=aal5 blocking=enabled
modify port=atm5 blocking=enabled

[ snmp.ini ]
config sysContact="Service Provider" sysName=ST5xx sysLocation=Austria
community add index=ROCommunity securityname=ROCommunity communityname=_DEV_3E4E8F55FEF2A2B0

[ vlan_res.ini ]

[ bridge.ini ]
ifadd intf=Bridge
ifadd intf=ethport2 dest=ethif2 logging=disabled
ifadd intf=ethport3 dest=ethif3 logging=disabled
ifadd intf=ethport4 dest=ethif4 logging=disabled
ifconfig intf=Bridge dest=atm_8_35
ifconfig intf=ethport2 logging=disabled
ifconfig intf=ethport3 logging=disabled
ifconfig intf=ethport4 logging=disabled
ifattach intf=ethport2 logging=disabled
ifattach intf=ethport3 logging=disabled
ifattach intf=ethport4 logging=disabled
config age=300 filter=no_WAN_broadcast vlan=disabled

[ vlanbridge.ini ]

[ bridgevlan.ini ]

[ vlanbridgerule.ini ]

[ dvm_res.ini ]
config timeout=90

[ eth.ini ]

[ pptp.ini ]
profadd name=pptp

[ ppprelay.ini ]

[ dhcspool.ini ]
pool add name=LAN_private

[ label.ini ]

[ ppp.ini ]

[ ip.ini ]
ifadd intf=LocalNetwork dest=bridge
ifconfig intf=loop mtu=65535 group=local
ifconfig intf=LocalNetwork mtu=1500 group=lan linksensing=disabled primary=enabled
ifattach intf=LocalNetwork
config forwarding=enabled redirects=enabled netbroadcasts=disabled ttl=64 fraglimit=64 defragmode=enabled addrcheck=dynamic mssclamping=enabled
config checkoptions=enabled
config natloopback=disabled
ipadd intf=LocalNetwork addr=10.0.0.138/24 addroute=enabled
ipconfig addr=10.0.0.138 primary=enabled
rtadd dst=255.255.255.255/32 gateway=127.0.0.1
rtadd dst=224.0.0.0/4 intf=LocalNetwork

[ autoip.ini ]

[ ipqosmeter.ini ]

[ igmh.ini ]
config requirera=disabled

[ autopvc.ini ]
config mode=pseudo type=bridge overwrite=disabled peakrate=0

[ mcast.ini ]

[ diagnostics.ini ]
config pingtimeout=1000 pingpacketsize=32

[ dnsc.ini ]
config timeout=15 retry=6 search=enabled trace=disabled
dnsadd addr=127.0.0.1 port=53

[ dnss.ini ]
config domain=lan timeout=15 suppress=0 state=enabled trace=enabled syslog=disabled WANDownSpoofing=disabled WDSpoofedIP=195.3.96.0
host add name=dsldevice addr=0.0.0.0 ttl=1200
host add name=speedtouch addr=0.0.0.0 ttl=1200

[ dhcrule.ini ]
debug traceconfig state=disabled

[ dhcs.ini ]
debug traceconfig state=disabled
policy verifyfirst=enabled trustclient=enabled
pool config name=LAN_private intf=LocalNetwork poolstart=10.0.0.1 poolend=10.0.0.254 netmask=24 gateway=10.0.0.138 server=10.0.0.138 leasetime=7200

[ dhcr.ini ]
ifconfig intf=LocalNetwork relay=enabled
add name=LocalNetwork_to_127.0.0.1
modify name=LocalNetwork_to_127.0.0.1 addr=127.0.0.1 intf=LocalNetwork giaddr=10.0.0.138

[ dhcc.ini ]
debug traceconfig state=disabled

[ dyndns.ini ]
service modify name=dyndns server=members.dyndns.org port=www-http request=/nic/update updateinterval=2097120 retryinterval=30 max_retry=3
service modify name=statdns server=members.dyndns.org port=www-http request=/nic/update retryinterval=30 max_retry=3
service modify name=custom server=members.dyndns.org port=www-http request=/nic/update retryinterval=30 max_retry=3
service modify name=No-IP server=dynupdate.no-ip.com port=www-http request=/ducupdate.php updateinterval=86400 retryinterval=30 max_retry=3
service modify name=DtDNS server=dtdns.com port=www-http request=/api/autodns.cfm updateinterval=86400 retryinterval=30 max_retry=3
service modify name=gnudip port=www-http

[ expr.ini ]
add name=wan type=intf intfgroup=wan
add name=lan type=intf intfgroup=lan
add name=local type=intf intfgroup=local
add name=tunnel type=intf intfgroup=tunnel
add name=dmz type=intf intfgroup=dmz
add name=guest type=intf intfgroup=guest
add name=private type=ip addr=10.0.0.0/8
add name=private type=ip addr=172.[16-31].*.*
add name=private type=ip addr=192.168.1.0/24
add name=ssdp_ip type=ip addr=239.255.255.250
add name=mdap_ip type=ip addr=224.0.0.103
add name=icmp type=serv proto=icmp
add name=igmp type=serv proto=igmp
add name=ftp type=serv proto=tcp dstport=ftp
add name=telnet type=serv proto=tcp dstport=telnet
add name=http type=serv proto=tcp dstport=www-http
add name=httpproxy type=serv proto=tcp dstport=httpproxy
add name=https type=serv proto=tcp dstport=443
add name=RPC type=serv proto=tcp dstport=135
add name=NBT type=serv proto=udp dstport=netbios-ns
add name=NBT type=serv proto=udp dstport=netbios-dgm
add name=NBT type=serv proto=tcp dstport=netbios-ssn
add name=SMB type=serv proto=tcp dstport=445
add name=imap type=serv proto=tcp dstport=imap2
add name=imap3 type=serv proto=tcp dstport=imap3
add name=imap4-ssl type=serv proto=tcp dstport=585
add name=imaps type=serv proto=tcp dstport=993
add name=pop2 type=serv proto=tcp dstport=pop2
add name=pop3 type=serv proto=tcp dstport=pop3
add name=pop3s type=serv proto=tcp dstport=995
add name=smtp type=serv proto=tcp dstport=smtp
add name=ssh type=serv proto=tcp dstport=22
add name=dns type=serv proto=tcp dstport=dns
add name=dns type=serv proto=udp dstport=dns
add name=nntp type=serv proto=tcp dstport=nntp
add name=ipsec type=serv proto=ah
add name=ipsec type=serv proto=esp
add name=ipsec type=serv proto=udp dstport=ike
add name=ipsec type=serv proto=udp dstport=4500
add name=esp type=serv proto=esp
add name=ah type=serv proto=ah
add name=ike type=serv proto=udp dstport=ike
add name=DiffServ type=serv dscp=!cs0
add name=sip type=serv proto=udp dstport=sip
add name=sip type=serv proto=tcp dstport=sip
add name=h323 type=serv proto=tcp dstport=h323
add name=h323 type=serv proto=udp dstport=h323
add name=h323 type=serv proto=tcp dstport=1718
add name=h323 type=serv proto=udp dstport=1718
add name=h323 type=serv proto=tcp dstport=1719
add name=h323 type=serv proto=udp dstport=1719
add name=dhcp type=serv proto=udp dstport=bootpc
add name=dhcp type=serv proto=udp dstport=bootps
add name=rtsp type=serv proto=udp dstport=rtsp
add name=rtsp type=serv proto=tcp dstport=rtsp
add name=ssdp_serv type=serv proto=udp dstport=1900
add name=mdap_serv type=serv proto=udp dstport=3235
add name=syslog type=serv proto=udp dstport=syslog

[ labelrule.ini ]
chain add chain=rt_user_labels
chain add chain=rt_default_labels
chain add chain=qos_user_labels
chain add chain=qos_default_labels

[ ids.ini ]
config state=disabled trace=disabled
signature modify signature=spoofed_packet state=disabled

[ ids_threshold.ini ]
modify index=1 window=1 limit=10 scaling=disabled
modify index=2 window=20 limit=20 scaling=enabled
modify index=3 window=2 limit=100 scaling=disabled
modify index=4 window=1 limit=200 scaling=disabled
modify index=5 window=1 limit=200 scaling=disabled
modify index=6 window=1 limit=200 scaling=disabled
modify index=7 window=1 limit=200 scaling=disabled

[ cwmp.ini ]
config state=disabled mode=full periodicInform=enabled periodicInfInt=3600 sessionTimeout=60 noIpTimeout=10 maxEnvelopes=2 connectionRequest=disabled connectionReqPath="" connectionReqUserName="" connectionReqPsswd="" connectionReqAuth=none qos-class=12 bootdelayrange=0
server config url="" username="" password=""
debug traceconfig level=0
runtimevar softwareVersion=5.3.9.2 bootstrap=disabled

[ sntpc.ini ]
config poll=60 pollpresync=60
config state=enabled

[ adslpots.ini ]
config opermode=multi_adsl2plus trace=disabled modemoption=10000000000000000000000000000000

[ grp.ini ]

[ rip.ini ]
config state=disabled

[ nat.ini ]
config

[ igmp.ini ]
config state=disabled qi=125 qri=10 lmqi=1 rv=2 requirera=disabled localgroup=disabled
ifconfig intf=LocalNetwork state=inactive

[ ipqosef.ini ]

[ connection.ini ]
appconfig application=IP6TO4 trace=disabled
appconfig application=PPTP trace=disabled timeout=300
appconfig application=ESP timeout=900
appconfig application=IKE trace=disabled timeout=900 floating=enabled
appconfig application=SIP trace=disabled timeout=21600 proxy=enabled
appconfig application=JABBER trace=disabled timeout=120
appconfig application=CU/SeeMe trace=disabled
appconfig application=RAUDIO(PNA) trace=disabled
appconfig application=RTSP trace=disabled timeout=0
appconfig application=ILS timeout=300
appconfig application=H245 timeout=300
appconfig application=H323 trace=disabled
appconfig application=IRC trace=disabled timeout=300
appconfig application=GAME(UDP) trace=disabled timeout=60
appconfig application=CONE(UDP) trace=disabled timeout=300
appconfig application=LOOSE(UDP) trace=disabled timeout=300
appconfig application=FTP trace=disabled
bind application=JABBER port=15222-15222
bind application=JABBER port=5222-5222
bind application=FTP port=21-21
bind application=IRC port=6660-6669
bind application=ILS port=1002-1002
bind application=ILS port=389-389
bind application=RTSP port=554-554
bind application=RAUDIO(PNA) port=7070-7070
bind application=CU/SeeMe port=7648-7648
bind application=IKE port=500-500
bind application=ESP port=0
bind application=PPTP port=1723-1723
bind application=IP6TO4 port=0
bind application=CONE(UDP) port=3478-3479
bind application=CONE(UDP) port=69-69
bind application=LOOSE(UDP) port=67-67
config configchangemode=immediate probes=disabled
debug trace=disabled
timerconfig timer=tcpidle value=900
timerconfig timer=tcpneg value=120
timerconfig timer=tcpkill value=3600
timerconfig timer=udpidle value=65
timerconfig timer=udpkill value=60
timerconfig timer=icmpkill value=60
timerconfig timer=ipidle value=60
timerconfig timer=ipkill value=0

[ switch.ini ]
mirror capture port=1

[ upnp.ini ]
config maxage=1800 writemode=full safenat=disabled

[ system.ini ]
settime timezone=+01:00 daylightsaving=enabled geotimezone=26
config upnp=enabled tr64=disabled mdap=enabled drst=enabled resetbutton=enabled
config digestauth=enabled
config autosave=enabled autosavedelay=10
locale dec_symbol=, group_symbol=. date_separator=- date_format=ddmmyyyy time_format=hmmss datetime_format=date+time duration_format=dhmmss

[ system_debug.ini ]
autosave trace=disabled

[ system_raccess.ini ]
config secure=disabled port=51003 timeout=20

[ dsd.ini ]
syslog config syslog=none
intercept config WDSpoofedIP=0.0.0.0 servertimeout=0 connecterrorurl="" categoryerrorurl="" monitorintercepturl="" unauthorizedrequrl="" imageredirect=disabled imageredirecturl="" alwaysuseip=disabled
urlfilter config state=disabled blockproxy=disabled blockipaddress=disabled blockobscuredip=disabled defaultaction=block
debug proxy state=disabled dest=0.0.0.0 port=0
debug recycling state=enabled interval=5 httpidle=1 otheridle=12
config state=disabled

[ webfilter.ini ]
config serverunreachable=block-all uncategorized=block license=none ticket="" sessionkey=""
server config retries=3 servertimeout=2 timeoutmultiplier=2 renewfrequency=23 useproxy=disabled
standard config stdmax=0 validcatmask=000000000000000000000000
professional config validcatmask=000000000000000000000000
config state=disabled

[ hostmgr.ini ]
config state=enabled scantime=30 autosave=disabled trace=disabled
add mac_addr=00:c0:9f:4a:1b:98 ip_addr=10.0.0.40 name=Unknown-00-c0-9f-4a-1b-98 type=generic_device ipintf=LocalNetwork

[ mlp.ini ]

[ mlpuser.ini ]

[ mbus.ini ]
config autoload=enabled
loadobjects

[ servmgr.ini ]
ifadd name=PPTP group=lan
ifadd name=HTTP group=lan
ifadd name=HTTPs group=lan
ifadd name=FTP group=lan
ifadd name=TELNET group=lan
ifadd name=DNS-S group=lan
ifadd name=SNMP_AGENT group=lan
ifadd name=SSDP group=lan
ifadd name=MDAP group=lan
ifadd name=PING_RESPONDER group=lan
modify name=PPTP state=enabled
modify name=DNS-C state=enabled
modify name=SNTP state=enabled
modify name=HTTP state=enabled
modify name=HTTPs state=enabled
modify name=WEBF state=disabled
modify name=FTP state=enabled
modify name=TELNET state=enabled
modify name=RIP state=disabled
modify name=IGMP-Proxy state=disabled
modify name=DNS-S state=enabled
modify name=DHCP-S state=enabled
modify name=SNMP_AGENT state=enabled
modify name=SSDP state=enabled
modify name=MDAP state=enabled
modify name=CWMP_client state=disabled
modify name=CWMP_server state=disabled
modify name=PING_RESPONDER state=enabled
mapadd name=HTTP port=www-http
mapadd name=HTTPs port=443
mapadd name=HTTPI intf=LocalNetwork port=www-http
mapadd name=HTTPI intf=LocalNetwork port=1080
mapadd name=HTTPI intf=LocalNetwork port=httpproxy
mapadd name=FTP port=ftp
mapadd name=TELNET port=telnet
mapadd name=DNS-S port=dns
mapadd name=SNMP_AGENT port=snmp
mapadd name=SSDP port=1900
mapadd name=MDAP port=3235