xDSL.at

von **quirax** » Fr 23 Apr, 2004 06:12

kann mir bitte jemand die base und dsl txt datei für inode zukommen lassen - danke

quirax

von **orso** » Fr 23 Apr, 2004 07:21

quirax hat geschrieben:kann mir bitte jemand die base und dsl txt datei für inode zukommen lassen - danke

quirax

Hallo!

Was hättest Du davon? In meiner Base.txt sind Netzwerkeinstellungen eingetragen, die für Dich sicherlich nicht passen würden. Vermutlich verwende ich auch andere Netzwerkkarten als Du, daher würde das auch nicht passen. Du müßtest also meine Dateien komplett ändern - die Wahrscheinlichkeit, dass sich dabei Fehler einschlichen ist sehr groß. Daher: LAde Dir alles was Du brauchst herunter, konfiguriere es, indem du die Doku liest. Wenn Du das machst, wird es klappen. Aus der Doku brauchst Du nicht besonders viel, um eine funktionierende Grundkonfiguration zu bekommen.

Die Stelle aus der dsl.txt, die für Inode xdsl geändert werden muß, sieht folgendermaßes aus - alles andere in der dsl.txt bleibt unverändert.

Code: Alles auswählen: #------------------------------------------------------------------------------ # Optional package: PPTP - DSL in Austria/Netherlands #------------------------------------------------------------------------------ OPT_PPTP='yes' # use PPP over ethernet: yes or no PPTP_NAME='INODE_xDSL' # circuit name, don't use spaces PPTP_USEPEERDNS='no' # use dns server of your provider: yes or no PPTP_ETH='eth1' # ethernet card connected to ADSL modem PPTP_USER='XXXXX' # username PPTP_PASS='XXXXX' # password PPTP_DEBUG='yes' # enable pppd debugging, 'yes' or 'no' PPTP_HUP_TIMEOUT='300' # idle time after which to hangup PPTP_MODEM_TYPE='xdsl' # 2 different types in Austria: bbaa / bcaa # in the Netherlands use 'mxstream' PPTP_CHARGEINT='60' # value of charge interval (in seconds) PPTP_TIMES='Mo-Su:00-24:0.0:Y' # times/charges when LCR PPTP_FILTER='yes' # filter traffic to be able to hangup # even if someone is trying to scan us

Aber wie gesagt! Lies die Doku! Sonst hast nur Probleme und es wird Dir auch keiner in den ausgeziechneten Fli4l Newsgroups helfen wollen.

Viel Erfolg wünscht Orso

von **quirax** » Fr 23 Apr, 2004 12:30

hallo orso
vielen dank für deine info, bin gerade beim basteln(166/64 2xnic, floppy)
router ist als eiserne reserve gedacht, falls inode die konfig umstellt und mein wlan router (compu-shack) nicht mehr funktionieren sollte.
greetings
quirax

ps: habe xdsl 1280/256 ohne voip, einzelplatz

von **ipv6** » Mo 26 Apr, 2004 11:25

ich hätte bitte auch gerne die files.
danke sehr

von **orso** » Mo 26 Apr, 2004 12:46

ipv6 hat geschrieben:ich hätte bitte auch gerne die files.
danke sehr

DIE FILES BRINGEN DIR NICHTS! Lies mein Posting zwei Postings oberhalb. Die dsl.txt habe ich ohnehin reinkopiert, die kann man nehmen, die base.txt wird aber bei jedem anders sein, oder glaubst Du wirklich, dass Du die gleichen netzwerkkarten wie der Ersteller der base.txt verwendet, im Fli4l hast? Wohl kaum...

Ein wenig Doku lesen hat noch keinem geschadet - ganz im Gegenteil. Nachher weiß man viel.

mfg- Orso

von **ipv6** » Di 27 Apr, 2004 05:58

hab übersehen das es eine 2.te seite gibt - und hab deshalb dein posting nicht gesehen

da ich meine antwort von page 1 aus gemacht habe.

mein fehler, sorry.

von **orso** » Di 27 Apr, 2004 08:19

ipv6 hat geschrieben:hab übersehen das es eine 2.te seite gibt - und hab deshalb dein posting nicht gesehen da ich meine antwort von page 1 aus gemacht habe.

mein fehler, sorry.

Hallo!

Das kann schon mal passieren... Ich will ja auch nicht als Oberlehrer erscheinen, aber meine - wenige - Fli4l-Erfahrung zeigt mir, dass es wirklich´nötig ist, sich ein wenig eizulesen. Dabei merkt man ohnehin sofort, was für einen relevant ist und was nicht. Die gesamte Doku braucht man sich am Anfang net reinziehen (schaden würde es aber auch net), denn man will ja nur einen einfachen Router haben. Wenn der dann läuft, kann man ihn ja noch erweitern. Ich würde sagen, man schafft es durchaus - mit ein wenig Begabung - einen fli4l in 1-2 Stunden lauffähig zu haben. Die selbe Zeit würde man auch brauchen, um zum Media oder was weiß ich welchen Markt zu fahren, um dort einen Router zu kaufen, der dann u. U. net funzt ;-)

Wenn Ihr Euch einen Fli4l für Inode xdsl aufsetzt, so müßt Ihr die Entwicklerversion (klingt arg, ist es aber nicht) 2.1.6 von Fli4l nehmen. Die dsl.txt könnt Ihr von mir nehmen, die base.txt machts euch selber, da in dieser EURE speziellen Netzwerkeinstellungen, Infos zu EUREN Netzwerkkarten gespeichert sind.

mfg- Orso

von **Cadoc** » Di 25 Mai, 2004 17:16

kann wer die configs nochmal posten oder mir mailen?

bzw posten wie dhcp configuriert gehört? - bezogen auf Inode jetzt

MfG Cadoc

von **orso** » Di 25 Mai, 2004 17:36

Cadoc hat geschrieben:kann wer die configs nochmal posten oder mir mailen?

bzw posten wie dhcp configuriert gehört? - bezogen auf Inode jetzt

MfG Cadoc

Hallo!

Meine dhcp.txt sieht folgendermaßen aus. Werden in der base.txt den Clients fixe IPs zugewiesen (über MAC-Adresse), so dürfen diese Adressen NICHT aus dem DHCP-Pool stammen. Sprich: Mein PC bekommt immer die IP 192.168.6.2, da die MAC-Adresse der NIC an diese IP gebunden ist, kommt ein Besucher mit Notebook zu mir, so bekommt er eine IP zwischen 192.168.6.8 und 192.168.6.10 vom DHCP zugewiesen.

Dies sollte bei Fli4l Version 2.1.7 ganz gleich sein.

mfg- Orso

Code: Alles auswählen: ##----------------------------------------------------------------------------- ## dhcp.txt - fli4l configuration parameters 2.1.6cvs20040301 ## ##----------------------------------------------------------------------------- #------------------------------------------------------------------------------ # Optional package: DHCP server #------------------------------------------------------------------------------ OPT_DHCP='yes' # install DHCP server: yes or no DHCP_LS_TIME_DYN='3600' # default time for dynamic leases: 1 hour DHCP_MAX_LS_TIME_DYN='7200' # max time for dynamic leases: 2 hours DHCP_LS_TIME_FIX='86400' # default time for fix leases: 1 day DHCP_MAX_LS_TIME_FIX='604800' # max time for fix leases: 1 week DHCP_RANGE_1='192.168.6.8 192.168.6.10' # range of n'th ethernet, se DHCP_DNS_SERVER_1='' # if empty, take ip of interface IP_ETH_N DHCP_WINSSERVER_1='' # ip-adress of 1st external wins-server # (use only, if OPT_NMBD='no' !) DHCP_WINSSERVER_2='' # ip-adress of 2nd external wins-server # (use only, if OPT_NMBD='no' !) DHCP_LEASES_DIR='/boot' # Don't touch this until you read the manual! DHCP_DENY_MAC_N='0' # number of denied MAC addresses DHCP_DENY_MAC_1='00:01:28:fa:13:f9' # MAC address is denied from DHCP DHCP_EXTRA_RANGE_N='0' # Not directly accessible networks (via relay) DHCP_EXTRA_RANGE_1='192.168.8.2 192.168.8.100' # range 1 DHCP_EXTRA_NETMASK_1='255.255.255.0' # Netmask for extra range DHCP_EXTRA_DNS_SERVER_1='192.168.6.1' # Dns Server DHCP_EXTRA_GATEWAY_1='192.168.8.1' # Default Gateway #-----------------------------------------------------------------------------a # Optional package: DHCP client #------------------------------------------------------------------------------ OPT_DHCLIENT='no' # install DHCP client: yes or no DHCLIENT_INTERFACES='eth1' # listen on interfaces, e.g. 2nd(!) NIC DHCLIENT_USEPEERDNS='no' # use dns server of your provider: yes or no DHCLIENT_EXEC_IPUPDOWN='yes' # execute ip-up and ip-down scripts? #------------------------------------------------------------------------------ # Optional package: DHCPCD Daemon #------------------------------------------------------------------------------ OPT_DHCPCD='no' # install DHCPCD: yes or no DHCPCD_INTERFACES='eth1' # listen on interfaces, e.g. 2nd(!) NIC DHCPCD_USEPEERDNS='no' # use dns server of your provider: yes or no DHCPCD_EXEC_IPUPDOWN='yes' # execute ip-up and ip-down scripts? #------------------------------------------------------------------------------ # Optional package: DHCRELAY Daemon - can only be active, if OPT_DHCP='no' #------------------------------------------------------------------------------ OPT_DHCRELAY='no' # install DHCRELAY: yes or no DHCRELAY_SERVER='192.168.6.1' # which is the actual dhcp server? DHCRELAY_IF_N='0' # no of interfaces, dhcrelay shall listen to DHCRELAY_IF_1='eth1' # first interface, dhcrelay listens to

*** EDIT by penguinforce: orso, nimm nächstesmal für code auch den entsprechenden bb-code!!***

von **Cadoc** » Di 25 Mai, 2004 19:24

herzlichen dank orso

ich werd gleich mal deinen ratschlag beherzigen - eigentlich müsste es ja jetzt funktionieren soweit ich das forum, die doku und das config file ansich verstanden habe

von **hauszerm** » Do 10 Jun, 2004 22:26

Ich hätte auch gerne die notwendigen Dateien base.txt, dsl.txt und dhcp.txt (falls das wirklich unbdingt notwendig ist)
Danke im Voraus, Michael

von **orso** » Fr 11 Jun, 2004 17:54

hauszerm hat geschrieben:Ich hätte auch gerne die notwendigen Dateien base.txt, dsl.txt und dhcp.txt (falls das wirklich unbdingt notwendig ist)
Danke im Voraus, Michael

Das macht keinen Sinn! Kapiert Ihr das denn nicht? Lies Dir einmal meine Beiträge weiter oben durch, und Du wirst es einsehen.

mfg- Orso

von **Bender** » Sa 12 Jun, 2004 21:31

ADSL der TA
Modem Speedtouch Home, PC als Fli4l-Router (Floppy formatiert auf 1.6x), 1 Notebook (LAN), 1 PC (WLAN), D-Link DI-624 rev C als Hub/Access-Point, 2 gleiche NIC’s (D-Link 530 TX).
Fli4l-Entwicklerversion 2.1.7

Code: Alles auswählen: ##----------------------------------------------------------------------------- ## base.txt - fli4l configuration parameters 2.1.7 ## ## You can edit/change this file with any text editor. ## ## P L E A S E R E A D T H E D O C U M E N T A T I O N , ## S E E R E A D M E . T X T ## ## B I T T E U N B E D I N G T D I E D O K U M E N T A T I O N ## L E S E N , S I E H E R E A D M E . T X T ## ## Creation: 26.06.2001 fm ## Last Update: $Id: base.txt,v 1.98 2004/04/30 08:44:46 babel Exp $ ## ## Copyright (c) 2001-2002 Frank Meyer <[email protected]> ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ##----------------------------------------------------------------------------- #------------------------------------------------------------------------------ # General settings: #------------------------------------------------------------------------------ HOSTNAME='fli4l' # name of fli4l router PASSWORD='xxx' # password for telnetd, ftpd and sshd FDD_1680='yes' # use 1680KB-Floppy MOUNT_BOOT='rw' # mount boot device (floppy): ro, rw, no TIME_INFO='MEZ-1MESZ,M3.5.0,M10.5.0' # description of local time # zone, don't touch without reading # documentation IP_CONNTRACK_MAX='' # override maximum limit of connection # tracking entries #------------------------------------------------------------------------------ # Serial console: #------------------------------------------------------------------------------ SER_CONSOLE='no' # use serial interface instead of crt/keyboard SER_CONSOLE_IF='0' # serial interface to use, 0 for ttyS0 (COM1) SER_CONSOLE_RATE='9600' # Baudrate for serial console #------------------------------------------------------------------------------ # Debug Settings: #------------------------------------------------------------------------------ DEBUG_STARTUP='no' # Write an execution trace of the boot DEBUG_LOG='' # sequence to file DEBUG_LOG or console if # DEBUG_LOG is empty #------------------------------------------------------------------------------ # Show Bootmenu after Login: #------------------------------------------------------------------------------ OPT_MENU='yes' # Start-menue for users MENU_LANGUAGE='de' # Default-Language of the Start-Menu #------------------------------------------------------------------------------ # Ethernet card drivers: # # Driver Bus Description # # 3c503 ISA 3COM EtherLinkII (3c503) # 3c505 ISA 3COM Etherlink Plus (3c505) # 3c507 ISA 3COM Etherlink 16 (3c507) # 3c509 ISA 3COM EtherLinkIII (3c509) # 3c515 ISA 3COM EtherLink XL ISA (3c515) # 3c59x PCI 3COM Vortex/Boomerang 3c59x,3c900,3c905 # 8139cp PCI RealTek 8139C+ # 8139too PCI RealTek 8129/8139 10/100 MB (NEW) # rtl8139 PCI RealTek 8129/8139, Donald Beckers Version, see # http://www.scyld.com/network/rtl8139.html # 82596 Apricot Xen-II on board Ethernet # acenic PCI Alteon AceNIC Gigabit Ethernet # at1700 ISA AT1700 (Fujitsu 86965) ISA # b44 PCI Broadcom 4400 # cs89x0 ISA IBM Etherjet, cs89x0 based Cards (Option io=0xnnn necessary!) # de4x5 PCI/EISA Digital DE425, DE434, DE435, DE450, DE500 # depca ISA DEPCA, DE10x, DE200, DE201, DE202, DE422 # dgrs PCI Digi International RightSwitch PCI/EISA # dl2k PCI D-Link DL2000-based Gigabit Ethernet Adapter # dmfe PCI DM9102 compatible PCI cards from Davicom # e1000 PCI Intel EtherExpress PRO/1000 Gigabit Ethernet # e100 PCI Intel's original driver for EEPRO100 # e2100 ISA Cabletron E21xx ISA # eepro100 PCI Intel EtherExpressPro PCI 10+/100B/100+ # eepro ISA Intel EtherExpress Pro/10 # eexpress ISA EtherExpress16 ISA # epic100 PCI SMC EPIC/100 (EtherPower II) PCI # eth16i ISA/EISA ICL EtherTeam 16i/32 # ewrk3 ISA EtherWORKS 3 ISA (DE203, DE204, DE205) # fealnx PCI ASOUND LAN 8139 card - not RTL8139 (NEW) # hamachi PCI GNIC-II Gigabit Ethernet # hp100 ISA/EISA/PCI HP 10/100VG PCLAN (ISA, EISA, PCI) # hp ISA HP PCLAN (27245, 27xxx) ISA # hp-plus ISA HP PCLAN+ (27247B and 27252A) ISA # lance ISA AMD LANCE and PCnet (AT1500, NE2100) ISA # lp486e Intel Professional Workstation/panther ethernet driver # natsemi PCI National Semiconductor # ne2k-pci PCI NE2000 PCI clone (eg. Realtek 8029, Winbond 89c940) # ne ISA NE2000 ISA clone (eg. Realtek 8019, # Accton 16xx, NatSemi 8390, UMC 9003/9008) # ni5010 MiCom-Interlan NI5010 # ni52 NI5210 card (i82586 Ethernet chip) # ni65 ni6510 (am7990 'lance' chip) # ns83820 PCI cards with National Semiconductor 83820 chip # pcnet32 PCI AMD PCI PCnet32 # r8169 PCI Realtek 8169 Gigabit Ethernet # sis900 PCI SiS 900/7016 # sk98lin PCI SysKonnect Gigabit Ethernet Server Adapters # smc9194 SMC's 9000 series of Ethernet cards # smc-ultra ISA SMC ULTRA # starfire PCI Starfire # sundance PCI DFE-550FX or DFE-530TXS (NEW) # tg3 PCI Broadcom Tigon3 # tlan PCI TI ThunderLAN (Compaq Netelligent ...) # tulip PCI DECchip Tulip (dc21x4x) PCI # tulip-db PCI DECchip Tulip (dc21x4x) PCI and work-alike chips from # Lite-On (PNIC) and Macronix (MXIC) and ASIX, # see http://www.scyld.com/network/tulip.html # via-rhine PCI VIA Rhine PCI (3043, VT86c100A, dfe-530tx) # wd ISA SMC WD80*3 # winbond-840 PCI Winbond 840 # yellowfin PCI Packet Engines G-NIC PCI Gigabit Eth Adapter # # Drivers below need the Package pcmcia installed: # # 3c574_cs PCMCIA 3Com 574 # 3c589_cs PCMCIA 3Com 589 # axnet_cs PCMCIA Asix AX88190 Fast Ethernet # fmvj18x_cs PCMCIA Fujitsu FMV-J181/182 Ethernet # nmclan_cs PCMCIA New Media Ethernet LAN # pcnet_cs PCMCIA NS8390-based cards (NE2000, DLINK etc) # smc91c92_cs PCMCIA SMC91c92-based cards # xirc2ps_cs PCMCIA Xircom: CE2, CEM28, CEM33, or CE3 # xircom_cb Cardbus Xircom Cardbus Cards # xircom_tulip_cb Cardbus Xircom Tulip-like Cardbus Cards # # If you don't find your Cardbus Card here then try the equivalent PCI-Driver: # 3c59x instead of 3c575_cb or 8139too instead of realtek_cb # # This drivers need PCMCIA _and_ WLAN: # # orinoco_cs PCMCIA Lucent/Orinoco WLAN-Cards # hostap_cs PCMCIA PrismII/2.5/3 based Cards - supports AP-Mode # wavelan_cs PCMCIA WaveLAN # wl24_cs PCMCIA ELSA Airlancer MC-2 - Should have Firmware 2.10 # airo_cs PCMCIA Cisco Aironet 4500 & 4800 series PCMCIA cards # ray_cs PCMCIA Raylink wireless cards # netwave_cs PCMCIA Netwave AirSurfer Wireless LAN # # this drivers need Package WLAN # # WLAN-Card Drivers IEEE802.11b: # # hostap_pci PCI Prism 2.5 based PCI Wlan Cards # hostap_plx PCI Prism 2,2.5 and 3 based PCMCIA-WLan Cards in PLX-Adapter # airo PCI/ISA Cisco Aironet 4500 & 4800 series PCI/ISA cards # # This 3 drivers acutally only work with Prism-II Cards - alternative driver to hostap_* # orinoco_pci PCI Lucent/Orinoco based WLAN-Cards # orinoco_plx PCI Lucent/Orinoco based PCMCIA WLAN-Cards in PLX Adapter # orinoco_tmd PCI Lucent/Orinoco based WLAN-Cards with TMD PCI-Bridge # WLAN-Card Drivers IEEE802.11g: # # prism54 PCI/PCMCIA Prism GT / Prism Duette / Prism Indigo Chipsets # Achten Sie auf die Hinweise zum Prism54 Treiber # in der WLAN Dokumentation! # # USB-Card Drivers # # pegasus teledat Fast Ethernet USB # # kaweth 3Com 3C19250 # ADS USB-10BT # ATEN USB Ethernet # ASANTE USB To Ethernet Adapter # AOX Endpoints USB Ethernet # Correga K.K. # D-Link DSB-650C and DU-E10 # Entrega / Portgear E45 # I-O DATA USB-ET/T # Jaton USB Ethernet Device Adapter # Kingston Technology USB Ethernet Adapter # Linksys USB10T # Mobility USB-Ethernet Adapter # NetGear EA-101 # Peracom Enet and Enet2 # Portsmith Express Ethernet Adapter # Shark Pocket Adapter # SMC 2202USB # Sony Vaio port extender # rtl8150 RTL8150-based USB-Ethernet-Cards # catc Belkin F5U111 # CATC NetMate # CATC NetMate II # smartBridges smartNIC # # DSL-Modems shown as Ethernetcards # # CDCEther Ericsson PipeRider (all variants) # Motorola (DM100 and SB4100) # Broadcom Cable Modem (reference design) # Toshiba PCX1100U and possibly other cable modems # Sharp Zaurus SL-5000D # atar215 Allied Telesyn AT-AR 215 # Sagem 250 # # USB-to-USB-network-cable # # usbnet Driver for usb-to-usb networklinks # # Token ring drivers (see token ring minit howto on # <http://www.tldp.org/docs.html#howto> and feel # free to submit documention changes # # 3c359 # abyss # ibmtr # lanstreamer # olympic # smctr # tmsisa # tmspci # # If you need dummy device simply use dummy as you ETH_DRV # and IP_ETH_%_NAME='dummy<number>' as your device # #------------------------------------------------------------------------------ ETH_DRV_N='1' # number of ethernet drivers to load, usually 1 ETH_DRV_1='via-rhine' # 1st driver: name (e.g. NE2000 PCI clone) ETH_DRV_1_OPTION='' # 1st driver: additional option ETH_DRV_2='ne' # 2nd driver: name (e.g. NE2000 ISA clone) ETH_DRV_2_OPTION='io=0x320 probe_pci=0' #------------------------------------------------------------------------------ # Ether networks used with IP protocol: #------------------------------------------------------------------------------ IP_ETH_N='1' # number of ip ethernet networks, usually 1 IP_ETH_1_NAME='' # optional: other device name than ethX IP_ETH_1_IPADDR='192.168.0.1' # IP address of your n'th ethernet card #IP_ETH_1_NETWORK='192.168.0.0' #network of your LAN IP_ETH_1_NETMASK='255.255.255.0' # netmask of your LAN #------------------------------------------------------------------------------ # Additional routes, optional #------------------------------------------------------------------------------ IP_DEFAULT_GATEWAY='' # normally not used, read documentation! IP_ROUTE_N='0' # number of additional routes IP_ROUTE_1='192.168.7.0 255.255.255.0 192.168.6.99' # network netmask gateway #------------------------------------------------------------------------------ # old or new style paket filter configuration #------------------------------------------------------------------------------ ORIG_FW_CONFIG='yes' #------------------------------------------------------------------------------ # Masquerading: #------------------------------------------------------------------------------ MASQ_NETWORK='192.168.0.0/24' # networks to masquerade (e.g. our LAN) MASQ_MODULE_N='1' # load n masq modules (default: only ftp) MASQ_MODULE_1='ftp' # ftp MASQ_MODULE_1_OPTION='' # options, see documentation MASQ_MODULE_2='irc' # irc MASQ_MODULE_2_OPTION='' # options, see documentation #------------------------------------------------------------------------------ # Optional package: PORTFW #------------------------------------------------------------------------------ OPT_PORTFW='yes' # install port forwarding tools/modules PORTFW_N='2' # how many portforwardings to set up PORTFW_1_SOURCE='8080' # sample 1: forward ext. port 8080 PORTFW_1_TARGET='192.168.0.2:80' # ...to int. host 192.168.6.15 port 80 PORTFW_1_PROTOCOL='tcp' # ...using tcp PORTFW_2_SOURCE='3000-3010' # sample 2: forward portrange 3000-3010 PORTFW_2_TARGET='192.168.0.2' # ...to int. host 192.168.6.15 PORTFW_2_PROTOCOL='tcp' # ...using tcp #------------------------------------------------------------------------------ # Routing without masquerading #------------------------------------------------------------------------------ ROUTE_NETWORK='' # optional: route from/to network, no masq #------------------------------------------------------------------------------ # Routing: internal hosts to allow/deny forwarding # # FORWARD_HOST_WHITE='no' describes a black list (forbidden) # FORWARD_HOST_WHITE='yes' describes a white list (allowed) # # Example: # FORWARD_HOST_WHITE='no' and FORWARD_HOST_N='0': # -> forwarding of 0 hosts is denied # -> forwarding of all hosts is allowed. #------------------------------------------------------------------------------ FORWARD_HOST_WHITE='yes' # 'no': black list, 'yes': white list FORWARD_HOST_N='2' # number of allowed/denied hosts FORWARD_HOST_1='192.168.0.2' # optional: 1st allowed/denied host FORWARD_HOST_2='192.168.0.3' # optional: 2nd allowed/denied host #------------------------------------------------------------------------------ # Routing: ports to reject/deny forwarding (from inside and outside!) #------------------------------------------------------------------------------ FORWARD_DENY_PORT_N='0' # no. of ports to reject/deny forwarding FORWARD_DENY_PORT_1='135:139 reject' # drop/reject forwarding of netbios FORWARD_DENY_PORT_2='445 reject' # drop/reject forwarding of MS-DS TRUSTED_NETS='' # but optionally allow forwarding between LANs #------------------------------------------------------------------------------ # Filter: accept connections from outside to several ports (served ports) #------------------------------------------------------------------------------ INPUT_POLICY='REJECT' # policy for input chain: reject or drop INPUT_ACCEPT_PORT_N='0' # no. of ports to accept from outside INPUT_ACCEPT_PORT_1='22 TCP' # e.g. allow connection to ssh service DENY_ICMP='no' # deny icmp (ping): yes or no PACKETFILTER_LOG='no' # log access to rejected/denied ports #------------------------------------------------------------------------------ # Domain configuration: #------------------------------------------------------------------------------ START_DNS='yes' # start dns server: 'yes' (use dnsmasq), # 'ens' (use ens) or 'no' DNS_LISTENIP_N='0' # if 0 then listen on all interfaces DNS_LISTENIP_1='192.168.0.1' # first IP to listen on # These two parameters are only relevant, # when START_DNS='yes'. DNS_FORWARDERS='195.3.96.67 195.3.96.68' # DNS servers of your provider, e.g. MSN DNS_VERBOSE='no' # log queries into syslog DOMAIN_NAME='lan.fli4l' # your domain name DNS_FORBIDDEN_N='0' # number of forbidden domains DNS_FORBIDDEN_1='foo.bar' # 1st forbidden domain DNS_FORBIDDEN_2='bar.foo' # 2nd forbidden domain DNS_REDIRECT_N='0' # number of redirected domains DNS_REDIRECT_1='foo.bar.foo' # 1st redirected domain DNS_REDIRECT_1_IP='192.168.6.100' # ip of redirected domain HOSTS_N='3' # number of hosts in your domain HOST_1_NAME='fli4l' # 1st host: ip and name HOST_1_IP='192.168.0.1' #HOST_1_ALIAS_N='0' # number of optional alias names #HOST_1_ALIAS_1='router.lan.fli4l' # optional alias name #HOST_1_ALIAS_2='gateway.lan.fli4l' # optional alias name HOST_2_NAME='deviii' # 2st host: ip and name HOST_2_IP='192.168.0.2' #HOST_2_MAC='de:ad:af:fe:07:19' # optional mac address used by dhcpd HOST_3_NAME='amsdt' # 3st host: ip and name HOST_3_IP='192.168.0.3' #HOST_3_MAC='de:ad:be:ef:07:19' # optional mac address used by dhcpd MX_N='0' # optional number of MX-records # if START_DNS='yes' only one MX supported # for DOMAIN_NAME MX_1_SERVER='mail.example.net' # fqdn of the mx MX_1_DOMAIN='example.net' # domain handled by MX_1_SERVER MX_1_PRIORITY='10' # priority of the mx, lower means better #------------------------------------------------------------------------------ # Special DNS configuration #------------------------------------------------------------------------------ DNS_N='0' # number of special dns servers, normally 0 #DNS_1='firma.de 192.168.1.12' # 1st special dns server for firma.de #DNS_2='lan.firma.de 192.168.2.12' # 2nd special dns server for lan.firma.de #------------------------------------------------------------------------------ # imond configuration: #------------------------------------------------------------------------------ START_IMOND='yes' # start imond: yes or no IMOND_USE_ORIG='yes' # use the original version of # imond instead the development version IMOND_PORT='5000' # TCP-Port dont open in INPUT_ACCEPT_PORT_x IMOND_PASS='' # imond-password, may be empty IMOND_ADMIN_PASS='' # imond-admin-password, may be empty IMOND_LED='' # tty for led: com1 - com4 or empty IMOND_BEEP='no' # beep if connection going up/down IMOND_LOG='no' # log /var/log/imond.log: yes or no IMOND_LOGDIR='/var/log' # log-directory, e.g. /var/log IMOND_ENABLE='yes' # accept "enable/disable" commands IMOND_DIAL='yes' # accept "dial/hangup" commands IMOND_ROUTE='yes' # accept "route" command IMOND_REBOOT='yes' # accept "reboot" command #------------------------------------------------------------------------------ # Generic circuit configuration: #------------------------------------------------------------------------------ IP_DYN_ADDR='yes' # use dyn. ip addresses (most providers do) DIALMODE='auto' # standard dialmode: auto, manual, or off #------------------------------------------------------------------------------ # optional package: syslogd #------------------------------------------------------------------------------ OPT_SYSLOGD='yes' # start syslogd: yes or no SYSLOGD_DEST_N='3' # number of destinations SYSLOGD_DEST_1='*.* /dev/console' # n'th prio & destination of syslog msgs SYSLOGD_DEST_2='*.* @192.168.0.2' # example: loghost 192.168.0.2 SYSLOGD_DEST_3='kern.info /var/log/dial.log' # example: log infos #------------------------------------------------------------------------------ # optional package: klogd #------------------------------------------------------------------------------ OPT_KLOGD='no' # start klogd: yes or no #------------------------------------------------------------------------------ # optional package: y2k correction #------------------------------------------------------------------------------ OPT_Y2K='no' # y2k correction: yes or no Y2K_DAYS='' # correct hardware Y2K-Bug: add x days #------------------------------------------------------------------------------ # Optional package: PNP #------------------------------------------------------------------------------ OPT_PNP='no' # install isapnp tools: yes or no #------------------------------------------------------------------------------ # Optional package: inittab #------------------------------------------------------------------------------ OPT_INITTAB='no' INITTAB_N='1' INITTAB_1='tty2 askfirst /usr/local/bin/mini-login'[/size]

Code: Alles auswählen: ##----------------------------------------------------------------------------- ## dsl.txt - fli4l configuration parameters 2.1.7 ## ## P L E A S E R E A D T H E D O C U M E N T A T I O N , ## S E E R E A D M E . T X T ## ## B I T T E U N B E D I N G T D I E D O K U M E N T A T I O N ## L E S E N , S I E H E R E A D M E . T X T ## ## Creation: 26.06.2001 fm ## Last Update: $Id: dsl.txt,v 1.19 2004/04/17 01:06:59 owb Exp $ ## ## Copyright (c) 2001-2002 Frank Meyer <[email protected]> ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ##----------------------------------------------------------------------------- #------------------------------------------------------------------------------ # Optional package: PPPoE #------------------------------------------------------------------------------ OPT_PPPOE='no' # use ppp over ethernet: yes or no PPPOE_NAME='DSL' # circuit name, don't use spaces PPPOE_USEPEERDNS='yes' # use dns server of your provider: yes or no PPPOE_ETH='eth1' # eth card connected to ADSL modem, # e.g. 2nd or an ethernet based # bridge, e.g. br0 PPPOE_TYPE='sync' # async, sync or in_kernel PPPOE_DEBUG='no' # enable pppd debugging, 'yes' or 'no' PPPOE_USER='anonymer' # username PPPOE_PASS='surfer' # password PPPOE_HUP_TIMEOUT='600' # idle time after which to hangup PPPOE_CHARGEINT='60' # value of charge interval (in seconds) PPPOE_TIMES='Mo-Su:00-24:0.0:Y' # times/charges when LCR PPPOE_FILTER='yes' # filter traffic to be able to hangup # even if someone is trying to scan us #------------------------------------------------------------------------------ # Optional package: FRITZDSL #------------------------------------------------------------------------------ OPT_FRITZDSL='no' # use fritzdsl: yes or no FRITZDSL_NAME='' # circuit name, don't use spaces FRITZDSL_USEPEERDNS='no' # use dns server of your provider: yes or no FRITZDSL_TYPE='fcdsl' # fcdsl, fcdsl2 or fcdslsl FRITZDSL_PROVIDER='U-R2' # type of provider FRITZDSL_USER='anonymer' # username FRITZDSL_PASS='surfer' # password FRITZDSL_DEBUG='no' # enable pppd debugging, 'yes' or 'no' FRITZDSL_HUP_TIMEOUT='600' # idle time after which to hangup FRITZDSL_CHARGEINT='60' # value of charge interval (in seconds) FRITZDSL_TIMES='Mo-Su:00-24:0.0:Y' # times/charges when LCR FRITZDSL_FILTER='no' # filter traffic to be able to hangup # even if someone is trying to scan us #------------------------------------------------------------------------------ # Optional package: PPTP - DSL in Austria/Netherlands #------------------------------------------------------------------------------ OPT_PPTP='yes' # use PPP over ethernet: yes or no PPTP_NAME='AON' # circuit name, don't write spaces PPTP_USEPEERDNS='yes' # use dns server of your provider: yes or no PPTP_ETH='eth1' # ethernet card connected to ADSL modem PPTP_USER='??????????' # username PPTP_PASS='????????' # password PPTP_DEBUG='yes' # enable pppd debugging, 'yes' or 'no' PPTP_HUP_TIMEOUT='600' # idle time after which to hangup PPTP_MODEM_TYPE='bcaa' # 2 different types in Austria: bbaa / bcaa # in the Netherlands use 'mxstream' PPTP_CHARGEINT='60' # value of charge interval (in seconds) PPTP_TIMES='Mo-Su:00-24:0.0:Y' # times/charges when LCR PPTP_FILTER='no' # filter traffic to be able to hangup # even if someone is trying to scan us #---------------------------------------------------------------------------- # optional package: PPPoE-Status #---------------------------------------------------------------------------- OPT_POESTATUS='no' # show pppoe status on console #3 #------------------------------------------------------------------------------ # Optional package: PFC - Packet-Filter-Compiler #------------------------------------------------------------------------------ OPT_PFC='no' # see documentation

Code: Alles auswählen: ##----------------------------------------------------------------------------- ## dhcp.txt - fli4l configuration parameters 2.1.7 ## ## P L E A S E R E A D T H E D O C U M E N T A T I O N , ## S E E R E A D M E . T X T ## ## B I T T E U N B E D I N G T D I E D O K U M E N T A T I O N ## L E S E N , S I E H E R E A D M E . T X T ## ## Creation: 26.06.2001 fm ## Last Update: $Id: dhcp.txt,v 1.13 2004/03/03 12:21:44 od Exp $ ## ## Copyright (c) 2001 Frank Meyer <[email protected]> ## ## This program is free software; you can redistribute it and/or modify ## it under the terms of the GNU General Public License as published by ## the Free Software Foundation; either version 2 of the License, or ## (at your option) any later version. ##----------------------------------------------------------------------------- #------------------------------------------------------------------------------ # Optional package: DHCP server #------------------------------------------------------------------------------ OPT_DHCP='yes' # install DHCP server: yes or no DHCP_LS_TIME_DYN='3600' # default time for dynamic leases: 1 hour DHCP_MAX_LS_TIME_DYN='7200' # max time for dynamic leases: 2 hours DHCP_LS_TIME_FIX='86400' # default time for fix leases: 1 day DHCP_MAX_LS_TIME_FIX='604800' # max time for fix leases: 1 week DHCP_RANGE_1='192.168.0.2 192.168.0.3' # range of n'th ethnet, see ETH_N ! DHCP_DNS_SERVER_1='' # if empty, take ip of interface IP_ETH_N DHCP_WINSSERVER_1='' # ip-adress of 1st external wins-server (use only, if OPT_NMBD='no' !) DHCP_WINSSERVER_2='' # ip-adress of 2nd external wins-server (use only, if OPT_NMBD='no' !) DHCP_LEASES_DIR='/boot' # Don't touch this until you read the manual! DHCP_DENY_MAC_N='0' # number of denied MAC addresses DHCP_DENY_MAC_1='00:01:28:fa:13:f9' # MAC address is denied from DHCP DHCP_EXTRA_RANGE_N='0' # Not directly accessible networks (via relay) DHCP_EXTRA_RANGE_1='192.168.8.2 192.168.8.100' # range 1 DHCP_EXTRA_NETMASK_1='255.255.255.0' # Netmask for extra range DHCP_EXTRA_DNS_SERVER_1='192.168.6.1' # Dns Server DHCP_EXTRA_GATEWAY_1='' # Default Gateway #-----------------------------------------------------------------------------a # Optional package: DHCP client #------------------------------------------------------------------------------ OPT_DHCLIENT='no' # install DHCP client: yes or no DHCLIENT_INTERFACES='eth0' # listen on interfaces, e.g. 2nd(!) NIC DHCLIENT_USEPEERDNS='no' # use dns server of your provider: yes or no DHCLIENT_EXEC_IPUPDOWN='yes' # execute ip-up and ip-down scripts? DHCLIENT_HOSTNAME='' # Transfer a specific host-id to provider #------------------------------------------------------------------------------ # Optional package: DHCPCD Daemon #------------------------------------------------------------------------------ OPT_DHCPCD='no' # install DHCPCD: yes or no DHCPCD_INTERFACES='eth0' # listen on interfaces, e.g. 2nd(!) NIC DHCPCD_USEPEERDNS='no' # use dns server of your provider: yes or no DHCPCD_EXEC_IPUPDOWN='yes' # execute ip-up and ip-down scripts? DHCPCD_HOSTNAME='' # Transfer a specific host-id to provider #------------------------------------------------------------------------------ # Optional package: DHCRELAY Daemon - can only be active, if OPT_DHCP='no' #------------------------------------------------------------------------------ OPT_DHCRELAY='no' # install DHCRELAY: yes or no DHCRELAY_SERVER='192.168.6.1' # which is the actual dhcp server? DHCRELAY_IF_N='0' # no of interfaces, dhcrelay shall listen to DHCRELAY_IF_1='eth1' # first interface, dhcrelay listens to

Sache läuft tadellos (zumindest in der genannten Topologie – die es leider nicht meht gibt, da der DI-624 rev C beim Gewitter letzten Feiertag, an Des Herrn Leib, Schlag 20 Uhr, den LAN-Geist aufgegeben hat).

xDSL.at

FLI4L base.txt und dsl.txt fuer Oestereich?

Wer ist online?