xDSL.at

Hallo!

ich hätte eine bitte. könnte mir jemand das original config file des st510 schicken, also jenes wo es als modem konfiguriert ist. bei mir funktioniert es zwar als router, aber ich möchte die modem config zur sicherheit da haben.

ps.: ich hab natürlich gesichert, aber ein festplattencrash hats vernichtet. danke schonmal.
meine email: [email protected]

du solltest ja eine cd bei dem gerät dabeigehabt haben ... da ist das original-config-file drauf ...

ST510_Austria_01.ini

Code: Alles auswählen

[ env.ini ]
set var="CONF_REGION" value="Austria"
set var="CONF_PROVIDER" value="Internet Service Provider"
set var="CONF_DESCRIPTION" value="Austria"
set var="CONF_SERVICE" value="Broadband Access"
set var="CONF_DATE" value="December 2002"
set var="CONF_VERSION" value="0.2"
set var="HOST_SETUP" value="none"
set var="ST_LAN_IP_ADDR" value="10.0.0.138"
set var="ST_LAN_NET_MASK" value="255.255.255.0"

[ phone.ini ]
add name=usb_port addr=usb.8.48 type=any logging=no
add name="Br1" addr=8*35 type=ethoa
add name="Br2" addr=8*36 type=ethoa
add name="Br3" addr=8*37 type=ethoa
add name="Br4" addr=8*38 type=ethoa
add name="RELAY_PPP1" addr=8*48 type=pppoa
add name="RELAY_PPP2" addr=8*49 type=pppoa
add name="RELAY_PPP3" addr=8*50 type=pppoa
add name="RELAY_PPP4" addr=8*51 type=pppoa
add name="DIALUP_PPP1" addr=8*64 type=pppoa

[ qos.ini ]
add name="default" class=ubr

[ bridge.ini ]
ifadd intf="Br1" dest=Br1
ifconfig intf=Br1 encaps=llc/snap portstate=forwarding
ifattach intf=Br1
ifadd intf="Br2" dest=Br2
ifconfig intf=Br2 encaps=llc/snap portstate=forwarding
ifattach intf=Br2
ifadd intf="Br3" dest=Br3
ifconfig intf=Br3 encaps=llc/snap portstate=forwarding
ifattach intf=Br3
ifadd intf="Br4" dest=Br4
ifconfig intf=Br4 encaps=llc/snap portstate=forwarding
ifattach intf=Br4
ifadd intf=usb_bridge dest=usb_port logging=no
ifattach intf=usb_bridge logging=no
config age=300

[ pptp.ini ]
profadd name="default" encaps=vcmux

[ dhcp.ini ]
config autodhcp=on scantime=20 spoofing=off trace=off
policy verifyfirst=off trustclient=on
pool add name="LAN_private"
pool config name=LAN_private poolstart=10.0.0.1 poolend=10.0.0.254 netmask=24 leasetime=7200
start

[ mer.ini ]

[ ipoa.ini ]

[ ppp.ini ]
ifadd intf="DIALUP_PPP1"
rtadd intf=DIALUP_PPP1 dst=0.0.0.0/0 src=0.0.0.0/0 metric=1
ifconfig intf=DIALUP_PPP1 dest=DIALUP_PPP1 proto=pppoa encaps=vcmux pap=off addrtrans=pat
ifconfig intf=DIALUP_PPP1 pcomp=on accomp=on passive=off silent=off echo=on
ifconfig intf=DIALUP_PPP1 restart=on demanddial=on idle=15
ifconfig intf=DIALUP_PPP1 user="guest" password="guest" savepwd=on
ifconfig intf=DIALUP_PPP1 trace=on status=up


[ cip.ini ]

[ pfilter.ini ]

[ pfirewall.ini ]
chain create chain="sink"
chain create chain="forward"
chain create chain="source"
rule create chain=sink index=0 srcintfgrp=!wan action=accept
rule create chain=sink index=1 prot=udp dstport=dns action=accept
rule create chain=sink index=2 prot=udp dstport=bootpc action=accept
rule create chain=sink index=3 action=drop
rule create chain=forward index=0 srcintfgrp=wan dstintfgrp=wan action=drop
rule create chain=source index=0 dstintfgrp=!wan action=accept
rule create chain=source index=1 prot=udp dstport=dns action=accept
rule create chain=source index=2 prot=udp dstport=bootps action=accept
rule create chain=source index=3 action=drop
assign  hook=sink chain="sink"
assign  hook=forward chain="forward"
assign  hook=source chain="source"

[ ip.ini ]
config forwarding=on firewalling=on redirects=on sourcerouting=off netbroadcasts=off ttl=64 fraglimit=64 defragmode=always addrcheck=dynamic mssclamping=on
apadd addr=10.0.0.138/24 intf=eth0 addroute=no
ifconfig intf=loop mtu=1500 group=local
ifconfig intf=eth0 mtu=1500 group=lan
ifconfig intf=DIALUP_PPP1 mtu=1500 status=up group=wan
rtadd dst=0.0.0.0/0 intf=eth0 metric=70
rtadd dst=224.0.0.0/4 intf=eth0
rtadd dst=10.0.0.0/24 gateway=10.0.0.138
rtadd dst=255.255.255.255/32 gateway=10.0.0.138
rtadd dst=10.0.0.0/24 src=10.0.0.0/24 gateway=10.0.0.138

[ autoip.ini ]

[ eth.ini ]


[ dnsd.ini ]
domain domain="lan"
add hostname="SpeedTouch"
start
troff

[ dhcc.ini ]
config trace=off
ifadd intf=eth0
ifconfig intf=eth0 addrtrans=none dns=on gateway=on metric=1
ifattach intf=eth0

[ adslpots.ini ]
config opermode=multimode maxbitspertoneUS=13

[ adslisdn.ini ]
config opermode=multimode maxbitspertoneUS=13

[ upnp.ini ]
config maxage=1800

[ nat.ini ]
bind application=SIP port=5060
bind application=GRE port=1
bind application=PPTP port=1723
bind application=ESP port=1
bind application=IKE port=ike
bind application=ILS port=ldap
bind application=ILS port=ils
bind application=H323 port=h323
bind application=FTP port=ftp
bind application=RTSP port=rtsp
bind application=IRC port=irc-u
bind application=RAUDIO(PNA) port=realaudio

[ system.ini ]
config upnp=enabled mdap=enabled dcache=enabled

[ endofarch ]



ST510_Austria_NAT_01.ini

Code: Alles auswählen

[ env.ini ]
set var="CONF_REGION" value="Austria"
set var="CONF_PROVIDER" value="Internet Service Provider"
set var="CONF_DESCRIPTION" value="Austria"
set var="CONF_SERVICE" value="Broadband Network Address Translation (NAT)"
set var="CONF_DATE" value="March 2003"
set var="CONF_VERSION" value="0.1"
set var="HOST_SETUP" value="none"
set var="ST_LAN_IP_ADDR" value="10.0.0.138"
set var="ST_LAN_NET_MASK" value="255.255.255.0"
set var="COLUMNS" value="80"
set var="ROWS" value="24"
set var="SESSIONTIMEOUT" value="120"

[ phone.ini ]
add name="DIALUP_PPP1" addr=8*48 type=pppoa

[ qos.ini ]
add name="default" class=ubr

[ oam.ini ]
config clp=1

[ bridge.ini ]
config age=300

[ pptp.ini ]
profadd name="default"

[ dhcp.ini ]
config autodhcp=on scantime=20 spoofing=off trace=off
policy verifyfirst=off trustclient=on
spoof failtime=4 errorlt=60 dodlt=10
stop

[ mer.ini ]

[ ipoa.ini ]

[ ppp.ini ]
ifadd intf="DIALUP_PPP1"
rtadd intf=DIALUP_PPP1 dst=0.0.0.0/0 src=10.0.0.0/24 metric=1
ifconfig intf=DIALUP_PPP1 dest=DIALUP_PPP1 proto=pppoa accomp=on idle=15 addrtrans=pat
ifconfig intf=DIALUP_PPP1 user="USERID" password=PASSWORT status=down

[ cip.ini ]

[ pfilter.ini ]

[ pfirewall.ini ]
chain create chain="sink"
chain create chain="forward"
chain create chain="source"
rule create chain=sink index=0 srcintfgrp=!wan action=accept
rule create chain=sink index=1 prot=udp dstport=dns action=accept
rule create chain=sink index=2 prot=udp dstport=bootpc action=accept
rule create chain=sink index=3 action=drop
rule create chain=forward index=0 srcintfgrp=wan dstintfgrp=wan action=drop
rule create chain=source index=0 dstintfgrp=!wan action=accept
rule create chain=source index=1 prot=udp dstport=dns action=accept
rule create chain=source index=2 prot=udp dstport=bootps action=accept
rule create chain=source index=3 action=drop
assign hook=sink chain="sink"
assign hook=forward chain="forward"
assign hook=source chain="source"

[ ip.ini ]
config forwarding=on firewalling=on redirects=on sourcerouting=off netbroadcasts=off ttl=64 fraglimit=64 defragmode=always addrcheck=dynamic mssclamping=on
apadd addr=10.0.0.138/24 intf=eth0 addroute=no
ifconfig intf=loop mtu=1500 group=local
ifconfig intf=eth0 mtu=1500 group=lan
ifconfig intf=DIALUP_PPP1 mtu=1500 group=wan
rtadd dst=0.0.0.0/0 intf=eth0 metric=70
rtadd dst=224.0.0.0/4 intf=eth0
rtadd dst=10.0.0.0/24 src=10.0.0.138/32 gateway=10.0.0.138 metric=1

[ autoip.ini ]

[ eth.ini ]
ifconfig intf=0 type=auto

[ dnsd.ini ]
domain domain="lan"
start
troff

[ dhcc.ini ]
config trace=off

[ adslpots.ini ]
config opermode=multimode maxbitspertoneUS=13

[ upnp.ini ]
config maxage=1800

[ nat.ini ]
bind application=SIP port=5060
bind application=GRE port=1
bind application=PPTP port=1723
bind application=ESP port=1
bind application=IKE port=ike
bind application=ILS port=ldap
bind application=ILS port=ils
bind application=H323 port=h323
bind application=FTP port=ftp
bind application=RTSP port=rtsp
bind application=IRC port=irc-u
bind application=RAUDIO(PNA) port=realaudio

[ system.ini ]
config upnp=disabled mdap=enabled dcache=enabled

[ endofarch ]



Leerzeile nach [ endofarch ] einhalten!